Posts Tagged ‘V’

(Almost) 100 years of Lewis structures: are they still fit for purpose?

Monday, September 27th, 2010

The molecule below was characterised in 1996 (DOI: 10.1246/cl.1996.489) and given the name tris(dithiolene)vanadium (IV). No attempt was made in the original article to give this molecule a Lewis structure using Lewis electron pair bonds. This blog will explore some of the issues that arise when this is attempted.1

NAMPOG.

The name given to the molecule by the chemists who made it reflects the ligand used, which we can represent as cis-HS-CH=CH-SH (via its di-sodium salt and reaction with VCl3). Its entry in the Cambridge crystal database is NAMPOG (which carries only the slightest of semantic or structural information). The chemical name however does carry some further information, namely the designation tris implies three fold symmetry (D3h in this case), and hence that all three ligands are in fact identical (structurally).

A nominal first stab at a Lewis electron pair representation reflecting this symmetry might be as shown above. At this point we hit a logical problem with the final component of the assigned name; the formal oxidation state of the metal is designated IV. However, three moles of (-)S-CH=CH-S(-) imply the ligands carry a formal charge of 6-, and that therefore the metal must be 6+, or VI. Six however is not an oxidation state normally exhibited by vanadium. Why did the original discoverers designate it IV? Well, because careful electron counting reveals the system as a whole has 161 electrons, of which 71 are designated as valence electrons, and hence it must have one unpaired valence electron. In the representation above, that electron is shown resident on the V atom with a dot, and the ESR spectrum measured for the molecule turns out to be apparently characteristic of V(IV) systems (they do not mention whether they also compared the spectra with those derived from genuine examples of  V(II), see below). This implies (as the authors note) that a total of only 4- must be delocalized over the three dithiolene ligands.

Returning to our electron counting, of the remaining 70 valence electrons, 24 electrons are implicit above as twelve sulfur lone pairs (which are sometimes shown as double dots, but their explicit inclusion here would cause clutter) and so we presume the remaining 46 electrons must be in Lewis-like electron pair bonds. Well, the structure above implies 24 such bonds (the six C-H lines, as well as the  Hs are also omitted by convention, again to avoid clutter!). We can begin to see why the original article lacks a Lewis structure, since the one above contains too many electrons (48 rather than 46).

How might one proceed to rescue the situation? Because a great many possible Lewis structures could be drawn, we have to learn a little more about the molecule and seek recourse in the bond lengths measured for the system. The most obvious is the C-C length, which turns out to be 1.36Å, a value significantly longer than expected for a C=C double (i.e. a four electron) bond, but a little shorter than the 3-electron bond found in e.g. benzene.

A second attempt at a Lewis structure

The Lewis structure (one of three equivalent ones) now has 5 lines in the C-C region, or ~3.3 electrons per C-C bond averaged over three ligands, which seems to match the length a little better. It also has 25 lines representing nominal electron pairs and ten sulfur lone pairs, a total of 70 electrons. The net effect of this representation is to transfer two electrons from the sulfur lone pairs to the vanadium, and hence to reduce the formal charge at the metal from 6+ to 4+, or to V(IV). This sort of behaviour, where electrons can be borrowed from a ligand and used to reduce (or oxidise) the metal they are coordinated to is called non-innocent behaviour. The dithiolene ligand is notoriously non-innocent. It results in this case in our innocent assumptions that bonds are defined by an integer number of electrons [2,(3),4,(5) or 6 as in Lewis’ original classifications] are no longer adequate, and that non-integer descriptors must also be used.

There is still one counting rule we have not inspected. To complete its valence shell to reach Kr, V needs 18 valence electrons. The representation above gives it 13. So how about the following, which ends up with a valence shell of 17 electrons for vanadium (and an oxidation state of V(II))?

Third time lucky?

This implies that the V-S bonds might be a little shorter than normal. Well in NAMPOG its 2.35Å, perhaps slightly shorter than a typical V-S single bond of ~2.4Å, but in fact we are now down at the noise level, and its clear that we have probably reached (if not exceeded) the limit of semantic interpretation of the Lewis model. In this case, only three (of 100s of possible) Lewis structures have been discussed, and of course they were selected only because we had some experimental information to discriminate between them. And we must be aware that whilst Lewis structures are the simplest way of analysing the electron distribution in a molecule, far more sophisticated analyses are nowadays possible. The real question is which analysis can actually result in a greater insight into the molecule? But the least that can be said about molecule NAMPOG is that it causes one to think about the problems of representing bonding (I will draw the line however at using this example in my university admissions interviews!).

1 I thank J. P. P. (Jimmy) Stewart for drawing this molecule on my blackboard  and hence provoking this blog post.

Tags:, , , , ,
Posted in Interesting chemistry | 9 Comments »

Bio-renewable green polymers: Stereoinduction in poly(lactic acid)

Saturday, July 24th, 2010

Lactide is a small molecule made from lactic acid, which is itself available in large quantities by harvesting plants rather than drilling for oil. Lactide can be turned into polymers with remarkable properties, which in turn degrade down easily back to lactic acid. A perfect bio-renewable material!

Lactide

The starting point for ring opening polymerisation is racemic lactide, or rac-LA. This is an equal mixture of the R,R and S,S enantiomers, and it is now treated with a catalyst based on a metal M. If M=Mg, there is a rather remarkable stereochemical outcome for the resulting polymer. The catalyst selects alternating enantiomers for the assembly, resulting in a chain (R,R),(S,S),(R,R),(S,S), etc, the name for which is a heterotactic polymer. It could instead have created a blend of equal proportions of (R,R),(R,R),(R,R) and (S,S),(S,S),(S,S) which is an isotactic polymer. Needless to say, these two polymers have quite different properties, and it very much matters which is formed. Without such a catalyst, a random atactic polymer is created rather than a stereoregular arrangement.

Poly (lactic acid)

The question is how does the catalyst manage to assemble the polymer with such stereoinduction? The origins of this depend on a detailed understanding of the mechanism of the reaction, and in 2005 we suggested one which offered an explanation for the stereospecificity (see E. L. Marshall, V. C. Gibson, and H. S. Rzepa, DOI: 10.1021/ja043819b and an interactive storyboard).

Mechanism for stereoregular polymerisation

The key features of this rational were:

  1. Two possible transition states may control the reaction, TS1 and TS2. Which one depends on which is the higher in energy.
  2. The smallest model for this process involves loading two molecules of lactide onto the catalyst. The first has already been ring opened, and will control the stereochemistry of the second, which is the one suffering the ring opening bond formations/breakings shown above (the first is lurking in the group R).
  3. This leads to four different possibilities, (R,R)-(R,R)*, (S,S)-(S,S)*, (R,R)-(S,S)*, and (S,S)-(R,R)* (where the * denotes the reacting lactide, as in the diagram above). These are all diastereomers, and hence will be different in energy. If one of the first two is the lowest, then isotactic polymer will result; if the latter two then a heterotactic polymer.

Back in 2004, we had constructed a model based on B3LYP and of necessity a mixed basis set, being 6-311G(3d) on the Mg, 6-31G on the lactide and only STO-3G on the catalyst. This was done because the complete system was actually rather large. Even so, a transition state calculation would regularly take at least 10 days to find using the fastest computers available to us at that time. Using this procedure, we found that the rate limiting kinetic step  was in fact TS2 for all four possibilities noted above. Of these, the (R,R)-(S,S) transition state turned out to represent the lowest energy pathway, thus confirming the observed heterotacticity for this particular catalyst.

Well, times have moved on:

  1. Six years later, computers are around 20 times faster! We can now afford to improve the basis set to 6-31G(d,p) on all the atoms, including the catalyst (the Mg stays at 6-311G(3d) however; improving it to 6-311G(3d,2f) makes little difference).
  2. We can now include the solvent (thf) as a continuum field.
  3. In the last five years the B3LYP functional has been shown to underestimate the energies of globular molecules. A modern functional such as ωB97XD, which includes dispersion energy corrections, should be expected to do much better.

It is the purpose of this blog to report an update to the modelling. Quoting relative free energies (including the solvation correction), the results come out as;

  1. (R,R)-(S,S) 0.0 kcal/mol for the TS1 geometry (see DOI: 10042/to-4950)
  2. (S,S)-(S,S) 1.8 for the TS2 geometry
  3. (S,S)-(R,R) 5.5 for the TS1 geometry
  4. (R,R)-(R,R) 9.1 for the TS1 geometry.

Well, there are surprises! Using the gas phase B3LYP model the key transition state was TS2; now its TS1 (for in fact three of the four possible transition states). The bottom line (almost) is that the same stereoisomer as before comes out the winner! The take home lesson is that in six years of progress, modelling can now encompass solvent and dispersion corrections. Many mechanisms with > ~100 atoms investigated in the past without inclusion of these effects could probably do with a re-investigation, especially if the transition states are “globular” in nature. Any by now you are probably wondering what the transition state looks like. Well, here it is (and see it in all its glory by clicking on the diagram below).

(R,R)-(S,S) Transition state for stereoregular lactide polymerisation. Click for animation

And if you are also wondering how one might proceed to analyse the origins of the stereoinduction, the NCI interaction surfaces (as described in this post) are shown below. Note how the extensive degree of green interaction surface is associated with the globular nature referred to above.

Non-covalent interaction (NCI) surfaces for the (R,R)-(S,S) transition state. Click for 3D

Tags:, , , , , , , , , , , , , , , , ,
Posted in General, Interesting chemistry | 3 Comments »

(Hyper)activating the chemistry journal.

Monday, September 7th, 2009

The science journal is generally acknowledged as first appearing around 1665 with the Philosophical Transactions of the Royal Society in London and (simultaneously) the French Academy of Sciences in Paris. By the turn of the millennium, around 10,000 science and medical journals were estimated to exist. By then, the Web had been around for a decade, and most journals had responded to this new medium by re-inventing themselves for it. For most part, they adopted a format which emulated paper (Acrobat), with a few embellishments (such as making the text fully searchable) and then used the Web to deliver this new reformulation of the journal. Otherwise, Robert Hooke would have easily recognized the medium he helped found in the 17th century.

In 1994, a small group of us thought that one could, and indeed should go further than emulated paper. We argued [1] that journals should be activated by delivering not merely the logic of a scientific argument, but also the data on which it might have been based. Of course, we encountered the usual problem; doing this might cost publishers more in production resources, and in the absence of a market prepared to pay the extra, the business model did not make sense (to the publishers). Well, 15 years later, and most publishers are indeed now thinking about how their journals can be enhanced. A number of interesting projects (the RSC’s Project Prospect is one which strives to bring science alive) have emerged. Another is the topic of this blog; the activation of the journal with molecular coordinates and data using the Jmol applet.

Initially (~2005), this project met with resistance from publishers, and the issue really amounted to what the definitive version of a scientific article should be. Should that definitive version be printable? That model, after all had served the community well for more than 300 years! And journals from the very beginning are still as readable now as when first published. In other words, print lasts! But print is pretty limiting after all. For a start, it is limited to 2D static representations. Molecules, by and large, do their magic in a dynamic three dimensions (4D in an Einsteinian sense). But print is also expensive; not merely to produce, but to transport paper around the world.

From the turn of the millennium, a number of publishers, amongst them the American Chemical Society, started to evolve the scientific article such that the pre-eminent version would now be considered to be the HTML form (perhaps as a prelude to phasing out print entirely? See an interesting commentary by a journal editor) and perhaps a digital Acrobat form which would be deemed to loose some of its functionality once printed (again see here for how Acrobat can be used to enhance things). Again however, a chicken-and-egg scenario resulted. To enhance the articles with extra functionality (such as data), they would need to find authors prepared to put the extra work into preparing the material. In fact, most authors already do that, but they call it supporting information. This is often highly data rich, covering materials such as spectra, coordinates and other information nowadays provided to researchers for analysis. Unfortunately, what has been missing is the education of authors to provide this information in a proper digital form which can be easily re-used by others, and on a Web page, converted automatically to nice interactive models. Most spectra which form part of the supporting information are in fact still scanned versions of printed spectra!

Enter computational chemists. Nowadays, they live in a world that truly does not need printing! Almost all of their data is already suitably digital. So perhaps it is no surprise to find that when enhanced journal articles started appearing around 2005, many were produced by this group of chemists. By now perhaps you are wondering what such an article might look like. Well, the remainder of this blog will be devoted to listing some examples. You will also notice that they come exclusively from our own publications. Perhaps someone will find the time to collect a far more representative set to better illustrate the diversity of this form, and how it is evolving. Meanwhile, you might wish to take a look at the following.

Part 1: The early days: 1994 onwards

These examples all relied on a browser plugin called Chime, which is no longer with us! Hence the pages designed to invoke it no longer display properly. But the data associated with the articles is still there!

  1. An early 1994 example of (hyper)activating a journal article can be seen here as the preliminary communication and
  2. in 1995 here as the final full article. I am told that this was the article that actually inspired the developers of Chime to enhance (Netscape) with a chemical plugin.
  3. This one from 1998 illustrates how articles can decay in functionality when Chime is no longer available.
  4. An ab initio and MNDO-d SCF-MO Computational Study of Stereoelectronic Control in Extrusion Reactions of R2I-F Iodine (III) Intermediates, M. A. Carroll, S. Martin-Santamaria, V. W. Pike, H. S. Rzepa and D. A. Widdowson, Perkin Trans. 2, 1999, 2707-2714 with the supporting information here.
  5. Huckel and Mobius Aromaticity and Trimerous transition state behaviour in the Pericyclic Reactions of [10], [14], [16] and [18] Annulenes. Sonsoles Martên-Santamarêa, Balasundaram Lavan and H. S. Rzepa, J. Chem. Soc., Perkin Trans 2, 2000, 1415. with the supporting information here.
  6. Peter Murray-Rust, H. S. Rzepa and Michael Wright, “Development of Chemical Markup Language (CML) as a System for Handling Complex Chemical Content”, New J. Chem., 2001, 618-634. DOI: 10.1039/b008780g. This article broke new ground in that the supporting information was something of a misnomer. It was expressed entirely in XML, including all the chemistry data, and used XSLT transforms on the fly to regenerate the article. In that sense, it was actually a superset of the published article. It would be fair to say that this article was rather ahead of its time (although it does seem appropriate to publish it in a new journal!).
  7. M. Jakt, L. Johannissen, H. S. Rzepa, D. A. Widdowson and R. Wilhelm, “A Computational Study of the Mechanism of Palladium Insertion into Alkynyl and Aryl Carbon-Fluorine bonds”, Perkin Trans. 2, 2002, 576-581 and supporting information.
  8. P. Murray-Rust and H. S. Rzepa, chapter in “Handbook of Chemoinformatics. Part 2. Advanced Topics.”, ed. J. Gasteiger and T. Engel, 2003, Vol 1, was not enhanced per se, but did lay out the principles of how it might/should be done.
  9. K. P. Tellmann, M. J. Humphries, H. S. Rzepa and V. C. Gibson, “An experimental and computational study of β-H transfer between organocobalt complexes and 1-alkenes”, Organometallics, 2004, 23, 5503-5513. DOI: 10.1021/om049581h and supporting information.

Part 2: 2005.

These four examples all now invoke Jmol, which downloads upon request and hence does not rely on the presence of any browser plugin. The four articles were submited with supporting information in the form of HTML. These were associated with the main article, but were not formal part of that article. In that sense, they represent an incarnation of the traditional model, with all the data firmly resident in the supporting information.

  1. Gibson, Vernon C.; Marshall, Edward L.; Rzepa, H. S. ” A computational study on the ring-opening polymerization of lactide initiated by β-diketiminate metal alkoxides: The origin of heterotactic stereocontrol”, J. Am. Chem. Soc., 2005, 127, 6048-6051. DOI: 10.1021/ja043819b and supporting information.
  2. H. S. Rzepa, Mobius aromaticity and delocalization”, Chem. Rev., 2005, 105, 3697 – 3715. DOI: 10.1021/cr030092l and supporting information.
  3. H. S. Rzepa, “Double-twist Mšbius Aromaticity in a 4n+2 Electron Electrocyclic Reaction”, 2005, Chem Comm, 5220-5222. DOI: 10.1039/b510508k The supporting information is also available directly.
  4. H. S. Rzepa, “A Double-twist Mobius-aromatic conformation of [14]annulene”, Org. Lett., 2005, 7, 637 – 4639. DOI: 10.1021/ol0518333 and supporting information.

Part 3: 2006 onwards

The supporting information has now been assimilated into the main body of the article proper, and within these confines contribute components such as enhanced figures or tables (i.e. enhanced with data)

  1. A. P. Dove, V. C. Gibson, E. L. Marshall, H. S. Rzepa, A. J. P. White and D. J. Williams, “Synthetic, Structural, Mechanistic and Computational Studies on Single-Site β-Diketiminate Tin(II) Initiators for the Polymerization of rac-Lactide”, J. Am. Chem. Soc., 2006,128, 9834-9843. DOI: 10.1021/ja061400a The enhancement can be seen in Figure 11.
  2. O. Casher and H. S. Rzepa, “SemanticEye: A Semantic Web Application to Rationalise and Enhance Chemical Electronic Publishing”, J. Chem. Inf. Mod., 2006, 46, 2396-2411. DOI: 10.1021/ci060139e
  3. H S. Rzepa and M. E. Cass, “A Computational Study of the Nondissociative Mechanisms that Interchange Apical and Equatorial Atoms in Square Pyramidal Molecules”, Inorg. Chem., 2006, 45, 3958–3963. DOI 10.1021/ic0519988. Interactive table at 10.1021/ic0519988/ic0519988.html
  4. M. E. Cass and H. S. Rzepa, “In Search of The Bailar Twist and Ray-Dutt mechanisms that racemize chiral tris-chelates: A computational study of Sc(III), V(III), Co(III), Zn(II) and Ga(III) complexes of a ligand analog of acetylacetonate”, Inorg. Chem., 2007, 49, 8024-8031. DOI: 10.1021/ic062473y The enhancement can be seen in Figure 2
  5. H. S. Rzepa, “Lemniscular Hexaphyrins as examples of aromatic and antiaromatic Double-Twist Möbius Molecules”, Org. Lett., 2008, 10, 949-952.DOI:10.1021/ol703129z The enhancement can be seen in Web Table 1.
  6. D. C. Braddock and H. S. Rzepa, “Structural Reassignment of Obtusallenes V, VI and VII by GIAO-based Density functional prediction”, J. Nat. Prod., 2008, DOI: 10.1021/np0705918 and WEO1.
  7. S. M. Rappaport and H S. Rzepa, “Intrinsically Chiral Aromaticity. Rules Incorporating Linking Number, Twist, and Writhe for Higher-Twist Möbius Annulenes”, J. Am. Chem. Soc., 2008, 130,, 7613-7619. DOI: 10.1021/ja710438j and WEO1 to 4
  8. C. S. M. Allan and H. S. Rzepa, “AIM and ELF Critical point and NICS Magnetic analyses of Möbius-type Aromaticity and Homoaromaticity in Lemniscular Annulenes and Hexaphyrins”, J. Org. Chem., 2008, 73, 6615-6622. DOI: 10.1021/jo801022b and WEO1
  9. C. S. M. Allan and H. S. Rzepa, “Chiral aromaticities. Möbius Homoaromaticity”, J. Chem. Theory. Comp., 2008, 4, 1841-1848. DOI: 10.1021/ct8001915 and WEO1
  10. C. S. M Allan and H. S. Rzepa, “The structure of Polythiocyanogen: A Computational investigation”, Dalton Trans., 2008, 6925 – 6932. DOI: 10.1039/b810147g and enhanced Table
  11. H. S. Rzepa, “Wormholes in Chemical Space connecting Torus Knot and Torus Link π-electron density topologies”, Phys. Chem. Chem. Phys., 2009, 1340-1345. DOI: 10.1039/b810301a and enhanced Table.
  12. H. S. Rzepa, “The Chiro-optical properties of a Lemniscular Octaphyrin”, Org. Lett., 2009, 11, 3088-3091. DOI: 10.1021/ol901172g
  13. C. S. Wannere, H. S. Rzepa, B. C. Rinderspacher, A. Paul, H. F. Schaefer III, P. v. R. Schleyer and C. S. M. Allan, “The geometry and electronic topology of higher-order Möbius charged Annulenes”, J. Phys. Chem., 2009, DOI: 10.1021/jp902176a and enhanced table
  14. H. S. Rzepa, “The distortivity of π-electrons in conjugated Boron rings.”, Phys. Chem. Chem. Phys., 2009, DOI: 10.1039/B911817A and enhanced table.
  15. H. S. Rzepa, “The importance of being bonded”, Nature Chem., 2009, DOI: 10.1038/nchem.373 and the exploratorium.
  16. King Kuok Hii, J.L.Arbour, H.S.Rzepa, A.J.P.White, “Unusual Regiodivergence in Metal-Catalysed Intramolecular Cyclisation of γ-Allenols”, Chem. Commun, 2009, DOI: 10.1039/b913295c and enhanced table.
  17. L. F. V. Pinto, P. M. C. Glória, M. J. S. Gomes, H. S. Rzepa, S. Prabhakar, A. M. Lobo. “A Dramatic Effect of Double Bond Configuration in N-Oxy-3-aza Cope Rearrangements – A simple synthesis of functionalised allenes”, Tet. Lett., 2009, 50, 3446-3449. DOI: 10.1016/j.tetlet.2009.02.228 and interactive table.
  18. H. S. Rzepa and C. S. M. Allan, “Racemization of isobornyl chloride via carbocations: a non-classical look at a classic mechanism”, J. Chem. Educ., 2010, DOI: 10.1021/ed800058c and interactive table.
  19. K. Abersfelder, A. J. P. White, H. S. Rzepa, and D. Scheschkewitz “A Tricyclic Aromatic Isomer of Hexasilabenzene”, Science, 2010, DOI: 10.1126/science.1181771 and interactive table.
  20. A. C. Spivey, L. Laraia, A. R. Bayly, H. S. Rzepa and A. J. P. White “Stereoselective Synthesis of cis- and trans-2,3-Disubstituted Tetrahydrofurans via Oxonium−Prins Cyclization: Access to the Cordigol Ring System”, Org. Lett., 2010, DOI 10.1021/ol9024259 and interactive table.
  21. J. Kong, P. v. R. Schleyer and H. S. Rzepa, “Successful Computational Modeling of Iso-bornyl Chloride Ion-Pair Mechanisms”, J. Org. Chem., 2010, DOI: 10.1021/jo100920e and interactive table.
  22. A. Smith, H. S. Rzepa, A. White, D. Billen, K. K. Hii, “Delineating Origins of Stereocontrol in Asymmetric Pd-Catalyzed α-Hydroxylation of 1,3-Ketoesters”, J. Org. Chem., 2010, 75, 3085-3096. DOI: 10.1021/jo1002906 and interactive table.
  23. H. S. Rzepa “The rational design of helium bonds”, Nature Chem., 2010, 2, 390-393. DOI: 10.1038/NCHEM.596 and web enhanced table.
  24. P. Rivera-Fuentes, J. Lorenzo Alonso-Gómez, A. G. Petrovic, P. Seiler, F. Santoro, N. Harada, N. Berova, H. S. Rzepa, and F. Diederich, “Enantiomerically Pure Alleno–Acetylenic Macrocycles: Synthesis, Solid-State Structures, Chiroptical Properties, and Electron Localization Function Analysis”, Chem. Eur. J., 2010, DOI: 10.1002/chem.201001087 and interactive figure
  25. H. S. Rzepa, “The Nature of the Carbon-Sulfur bond in the species H-CS-OH”, J. Chem. Theory. Comput., 2010, 49, DOI: 10.1021/ct100470g and interactive table.
  26. H. S. Rzepa, “Can 1,3-dimethylcyclobutadiene and carbon dioxide co-exist inside a supramolecular cavity?”, Chem. Commun., 2010, DOI: 10.1039/C0CC04023A and interactive table
  27. M. R. Crittall, H. S. Rzepa, and D. R. Carbery, “Design, Synthesis, and Evaluation of a Helicenoidal DMAP Lewis Base Catalyst”, Org. Lett., 2011, DOI: 10.1021/ol2001705 and interactive table
  28. H. S. Rzepa, “The past, present and future of Scientific discourse”, J. Cheminformatics, 2011, 3, 46. DOI: 10.1186/1758-2946-3-46 and interactive figure 3, figure 4 and figure 5.
  29. H. S. Rzepa, “A computational evaluation of the evidence for the synthesis of 1,3-dimethylcyclobutadiene in the solid state and aqueous solution”, Chem. Euro. J., 2012, in press.
  30. J. L. Arbour, H. S. Rzepa, L. A. Adrio, E. M. Barreiro, P. G. Pringle and K. K. (Mimi) Hii, “Silver-catalysed enantioselective additions of O-H and N-H to C=C bonds: Non-covalent interactions in stereoselective processes”, Chem. Euro. J., 2012, in press, Web table 1 and Web table 2.
  31. H. S. Rzepa, “Chemical datuments as scientific enablers”, J. Chemoinformatics, submitted.
  32. A. P. Buchard, F. Jutz, F. M. R. Kember, H. S. Rzepa, C. K. Williams, C.K., “Experimental and Computational Investigation of the Mechanism of Carbon Dioxide/Cyclohexene Oxide Copolymerization Using A Dizinc Catalyst”, in press. Interactivity box
  33. D. C. Braddock, D. Roy, D. Lenoir, E. Moore, H. S. Rzepa, J. I-Chia Wu and P. von R. Schleyer, “Verification of Stereospecific Dyotropic Racemisation of Enantiopure d and l-1,2-Dibromo-1,2-diphenylethane in Non-polar Media”, Chem. Comm., 2012, just published. DOI: 10.1039/C2CC33676F and interactivity box.
  34. K. Leszczyńska, K. Abersfelder, M. Majumdar, B. Neumann, H.-G. Stammler, H. S. Rzepa, P. Jutzi and D. Scheschkewitz, “The Cp*Si+ Cation as a Stoichiometric Source of Silicon, Chem. Comm., 2012, 48, 7820-7822. DOI: 10.1039/c2cc33911k. Cites links to 10042/to-13974, 10042/to-13982, 10042/to-13969, 10042/20028, 10042/to-13973, 10042/to-13985
  35. H. S. Rzepa, “A computational evaluation of the evidence for the synthesis of 1,3-dimethylcyclobutadiene in the solid state and aqueous solution”, Chem. Euro. J., 2013, 4932-4937. DOI: 10.1002/chem.201102942 and WebTable
  36. H. S. Rzepa, “Chemical datuments as scientific enablers”, J. Chemoinformatics, 2013, 4, DOI: 10.1186/1758-2946-5-6. The interactivity box is integrated into the body of the article.
  37. M. J. Cowley, V. Huch, H. S. Rzepa, D. Scheschkewitz, “A Silicon Version of the Vinylcarbene – Cyclopropene Equilibrium: Isolation of a Base-Stabilized Disilenyl Silylene”, 2013, Nature Chem., in press and Webtable.
  38. M. J. S. Gomes, L. F. V. Pinto, H. S. Rzepa, S. Prabhakar, A. M. Lobo, “N-Heteroatom Substitution Effects in 3-Aza-Cope Rearrangements”, Chemistry Central, 2013, 7:94. doi:10.1186/1752-153X-7-94 and Table.
  39. H. S. Rzepa and C. Wentrup, “Mechanistic Diversity in Thermal Fragmentation Reactions: a Computational Exploration of CO and CO2 Extrusions from Five-Membered Rings”, J. Org. Chem., DOI: 10.1021/jo401146k and Table.
  40. D. C. Braddock, J. Clarke and H. S. Rzepa “Epoxidation of Bromoallenes Connects Red Algae Metabolites by an Intersecting Bromoallene Oxide – Favorskii Manifold”, Chem. Comm., 2013, DOI: 10.1039/C3CC46720A and Table.
  41. M. J. Fuchter, Ya-Pei Lo and H. S. Rzepa, “Mechanistic and chiroptical studies on the desulfurization of epidithiodioxopiperazines reveal universal retention of configuration at the bridgehead carbon atoms”, J. Org. Chem., 2013, in press. doi: 10.1021/jo401316a and table.

References

  1. H.S. Rzepa, B.J. Whitaker, and M.J. Winter, "Chemical applications of the World-Wide-Web system", Journal of the Chemical Society, Chemical Communications, pp. 1907, 1994. https://doi.org/10.1039/c39940001907

Tags:, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,
Posted in Chemical IT, Interesting chemistry | 6 Comments »